Rotolight Anova Spécifications télécharger pdf (Page 11)

Page 11

Accessory Mounting Spigots

The three spigots on the front face of ANOVA are used to mount the ‘Gel Frame

Holder’ (lower position) using three ‘Ball Lock Pins’, and the upper mounting position

is used to mount optional accessories for the ANOVA, e.g. Honeycomb Louver,

SoftBox, Focussing Fresnel Filter (Available separately).

Barn Doors

The Barn doors install using 4 of the smaller ‘soft touch’ knobs on the main mounting

points of the utility blocks. The six sided barn doors have two types of shutter

shapes, the three shutters which become narrower at the outer edges close in rst,

and the three trapezoid shutters which become wider at the outer edge close in

after the other types, this enables the ANOVA to create soft hexagon shaped pools

of light when the doors are folded inwards. The doors can be folded ‘at’ at 90

degrees to the body.

The ight case will store the ANOVA with both the Gel Frame holder and the Barn

doors tted (closed).

Gel Frame Holder

The ‘Gel Frame Holder’ mounts the spigots with the ring and spokes closest to the

protective window glass, and is secured in place using three ‘Ball Lock Pins’ at the

lowest positions on the spigots. You can carefully slide a precut lter gel underneath

the Gel frame or, alternatively you can remove two of the pins and lift the frame up

slightly to install the lter gel. The ‘Lee’ lter gels are stored in the Gel Sleeve, in the

lid of the ightcase.

Anova_User_Guide.indd 11 04/05/2012 14:03

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Rotolight Anova Spécifications Page 11